Material Science:

The frame is welded with channel steel, angle steel and steel plate, and the filling material is concrete. Vibration isolators usually use damping spring isolators and rubber shear isolators.   

Specifications:

The GT type vibration isolation platform is divided into channel type (GTC) and mixed open type (GTH) according to the frame structure. The channel type is not filled with mass. The mixed type is concrete filled with channel steel to increase the quality of the platform and improve the isolation efficiency. According to the installation position of the isolator, it can be divided into bottom support type (A), angle branch type (B) and cantilever type (C). The thickness of the platform is divided into three specifications: 100mm, 200mm and 300mm. The length and size range is 600 to 2400mm. The width ranges from 600 to 1400mm. The weight ranges from 147 to 2365kg.   

Characteristic:

● The frequency of self vibration is low and the transfer coefficient is small            

● Good isolation effect and wide range of application      

● Standardization design, serial product          

● Convenient construction and installation, low cost   

Application:

It is suitable for basic vibration isolation of air compressor unit, generator set, refrigeration unit, engine test bench and pump and other power equipment.